著作

1	Jeffery K. Cochran and Horng-Chyi Horng, 1995, 'Object Definitions for Computer Integrated JIT Manufacturing Systems', Proceedings of the 1995 Western MultiConference (Object-oriented Simulation), pp.135-140.
2	Horng-Chyi Horng, 1997, 'Modified Zone Control Charts', The Journal of Chaoyang University of Technology, Vol.2, pp.113-125.
3	Horng, H.C. and Hwa, W.C., 1998, `Push/Pull Systems Dynamic Behavior for Hot Job Order Processing – A Comparison Using Simulation and DOE`, Proceedings of Automation ’98 and ICPR Asia Meeting, Session A6-4.
4	Horng, H.C. and Cochran, J.K., 1998, ‘Simulation Constructs for Computer-Integrated Just-in-Time Production Systems: An Object-Oriented Approach’, International Journal of Computer Integrated Manufacturing, Vol. 11, No. 2, pp. 130-141.
5	Cochran, J.K. and Horng, H.C., 1999, `Dynamic Dispatching Rule-pairs for Multitasking Workers in JIT Production Systems`, International Journal of Production Research, Vol. 37, No. 10, pp.2175-2190.
6	Horng, H.C., 1999, `Push和Pull 系統生產行為變遷之模擬分析與評估`, 中國工業工程學會八十八年度年會論文集.
7	Horng, H.C., 2000, `Simulation Comparisons of the Multitasking Worker Dispatching Rules for Production Lines with High Priority Orders`, Proceedings of the 8^th Bellman Continuum and International Workshop on Intelligent Systems Resolutions, pp.325-329.
8	Horng, H.C. and Cochran, J.K., 2001, `PSR: A decision Support Methodology for Multitasking Workers Assignment in JIT Systems`, Computers and Industrial Engineering, Vol.39, pp.159-171.
9	Horng, H.C., 2001, ‘Simulation Evaluation and Analysis of Bayes Stopping Rules for Reliability Testing,’ The Journal of Chaoyang University of Technology, Vol. 6, pp. 413-427.
10	Horng, H.C. and Lai, H.T., 2001, ‘The Quality System IDEF₀ Model Based On Certification Purposes,’ Proceedings of the 16^th International Conference on Production Research, (CR-ROM, Paper No. 0178).
11	Horng, H.C. and Chou, S.H., 2002, ‘Comparing Dispatching Rules in an Open Shop-A Simulation Study,’ Proceedings of the 2002 IIE Annual Research Conference, (CD-ROM, Paper No. 2082).
12	Horng, H.C. and Yu, K.W., 2002, ‘The Quality System Knowledge Model Based on Certification Purposes,’ Proceedings of the 2002 IIE Annual Research Conference, (CD-ROM, Paper No. 2081).
13	Horng, H.C. and Liu, C.L., 2003, ‘Steady-state Simulation Comparison of Dispatching Rules in Open Shops,’ Proceedings of the 17^th International Conference on Production Research, (CD-ROM, Paper No. 0165).
14	Horng, H.C., 2004, ’A Fuzzy Heterogeneous Group’s Decision Making Model on Nonconforming Product Concession,’ Proceedings of the 33^rd International Conference on Computer and Industrial Engineering, (CD-ROM, Paper No. CIE027).
15	Horng, H.C., Chang, W.H., and Chang, H.I., 2004,’Constructing Heterogeneous Groups’ Decision Model- An Example on Nonconforming Product Concession, The Journal of Chaoyang University of Technology, Vol. 9, pp 121-150.
16	顏子殷、洪弘祈, 2005, ‘積體電路產品封裝後溫度循環試驗結果改善探討’, 中國工業工程學會九十四年度年會學術研討會, Paper No. CIIE-6312).
17	Horng, H.C. and Liu, Y.H., 2006, ‘Modified Zone Control Chart for Short Run Process,’ Proceedings of the 36^th International Conference on Computers & Industrial Engineering Conference, (CD-ROM, Paper No. CIE00298).
18	Horng, H.C. and Kao, H.T., 2006, ‘Transient Performance Comparison of Dispatching Rules for Flowshops with High Priority Orders,’ Proceedings of the 36^th International Conference on Computers & Industrial Engineering Conference, (CD-ROM, Paper No. CIE00297).
19	Horng, H.C. and Kao, H.T., 2006, ‘Transient Simulation Analysis on the Performance of Dispatching Rules in a Job Shop,’ Proceedings of the 2006 Summer Simulation Multiconference, (SCSC’06, CD-ROM, Paper No. SCSC38).
20	Horng, H.C., 2006, 'Comparing Steady-state Performance of Dispatching Rule-pairs in Open Shops,' International Journal of Applied Science and Engineering, Vol. 4, No. 3, pp. 259-273.
21	Horng, H.C. and Yu, Ya-Ying 2007, 'The Effects of Order Review and Release on the Performance of Dispatching Rules in Job Shops, Proceedings of the 22nd European Conference on Operational Research (EURO XXII), (CD-ROM, Paper No. TD40.3).
22	Chen, M., Horng, H.C., and Lin, K.Y., 2007, 'The Reliability Prediction and Environmental Factor Analysis of Reliability Test- Case Study of the Short-distance Wireless Communication Module,' The Journal of Chaoyang University of Technology, Vol. 12, pp. 39-54.
23	Horng, H.C., Hu, Chi-Chang, and Cheng, Tao-Ming, 2008, 'Evaluating the Effectiveness of FDM in Identifying Important Factors in a Dynamic Flowshop,' Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing, (CD-ROM, Paper No. 6D-1).
24	Chen, M., Horng, H.C., and Lin, H.C., 2008, “A Modified Imperfect Preventive Maintenance Policy Considering Failure Replacement,” Proceedings of the 3^rd Asian International Workshop on Advanced Reliability Modeling, Sheu, S.H. and Dohi, T. (Ed), pp. 355-361.
25	Sun, T.H., Horng, H.C., Liu, C.S., and Tien, F.C., 2009, “Invariant 2D object recognition using KRA and GRA,” Expert Systems with Applications, Vol. 36, pp. 11517-11527.
26	Horng, H.C., Hu, C.C., and Cheng, T.M., 2009, “Evaluating the Effectiveness of FDM in Identifying Important Factors in a Dynamic Flowshop,” Robotics and Computer-Integrated Manufacturing, Vol. 25, pp. 894-900.
27	Horng, H.C. and Hu, Shu-pei, 2009, “The Learning and Forgetting Effects of Dynamic Workers on the Performance of Dispatching Rules in Flow Shops,” Proceedings of the 13^th World Multi-Conference on Systemics, Cybernetics and Informatics, Baralt, et al. (Ed.), Vol. II, pp. 127-131.