| 姓名 |
黃顯舜(Hsien-Shun
Huang) |
電子郵件信箱 |
s9011627@mail.cyut.edu.tw |
| 畢業系所 |
營建工程系碩士班(Department
and Graduate Institute of Constrction Engineering) |
| 畢業學位 |
碩士(Master) |
畢業時期 |
91學年第2學期 |
| 論文名稱(中) |
紙管結構承載力試驗與分析 |
| 論文名稱(英) |
Load-Bearing
Capacity Experiments and Analysis of Paper Tube Structures |
| 檔案 |
本電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。
|
論文使用權限 |
校內外完全公開 |
| 論文語文/頁數 |
中文/102 |
| 摘要(中) |
本研究以實際的紙管試驗，來了解其結構行為與特性，進而探討以紙管材料興建建築物之可行性。研究內容包括紙管抗壓試驗、紙管抗彎試驗，來求得紙管材料之彈性係數E、臨界應力fcr、降伏應力fy與極限應力fu等參數。另以紙管組合成單層門型構架，以MTS(Material
Test System)油壓試驗機進行壓載，以了解其力學行為、破壞模式和結構荷重之大小。並以有限元素分析程式ANSYS
進行門型構架數值模擬分析，結合實驗值與ANSYS分析值進行比較探討，以提供紙管結構設計與應用之參考。 |
| 摘要(英) |
This
study utilized experiments to find out the structural behavior and
characteristic of paper tubes. The present research also discussed the
possibility of construction built with paper tubes. These experiments
include compressive strength tests and bending strength tests which to
obtain the elastic modulus E, the critical buckling stress fcr, the
yielding stress fy and the ultimate stress fu of paper tubes. Besides,
this study experimented with planar frames to resist the loading by MTS
(Material Test System). The goal of these experiments is to obtain the
mechanical property, type of failure and loading capacity of paper tube
structures. This study also utilized the nonlinear finite element
program ANSYS to simulate the load-deflection responses of planar frames
made by paper tubes. The results of analyses and experiments are
compared and discussed. The design and application of paper tube
structure is suggested for reference. |
| 關鍵字(中) |
紙管試驗
紙管結構
有限元素法 |
關鍵字(英) |
paper tube structure
finite element method
paper tube experiment |
| 指導教授 |
金文森
|